Products

Chevrolet: 1.4kw, fits 13" and 14" flywheels. 10t 28mm replaces 9t 25mm pinion. Also available in 1.4kw. For Chev 14" ring gear installs the engine block must have 2 threaded...

Chevrolet: 1.4kw, 24V suits 13" and 14" ring gears. Picture differs from actual starter. For 14" ring gear installs the Chev engine block must have 2 threaded "inline" mounting holes.

Cadillac: 252ci V6, 350ci, 368ci V8. 12t pinion replaces OEM 9t. Replaces Delco 1108504, 10496870 and others.

Harley: B/B EVO. 1989-94. Large jack bolt. 1.4kw. Non chrome finish.

Harley: Sportster EVO. 1.4kw.

Motus V4. 12v 1.4kw.

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.2kw offset 11t replaces 9t pinion. Also available in 1.4kw, 2.0kw and...

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.4kw offset 11t replaces 9t pinion.   Replaces 3 hole mount starters.

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 1.2kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 1.4kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 2.0kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford: Bronco II  2.8L V6 1.2kw offset 11t replaces 9t pinion.

Ford FE: Some 1962-64 and later FE's with 9t 25mm pinion 1.2kw. Also available in 1.4kw, 2.0kw and 2.2kw. Replaces 3 hole mount starters.

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.4kw offset 11t replaces 9t pinion. Replaces 3 hole mount starters. 

Ford: FE 390ci, 427ci and 428ci HP engines with cast iron headers or lge. dia. tubing headers. 1.4kw also available as 2.0kw.

Ford: FE 390ci, 427ci and 428ci HP engines with cast iron headers or lge. dia. tubing headers. 2.0kw.

Ford marine: V8 counter rotating engine,12V, 1.2kw, CCW. Also available in 1.4kw. Picture differs from actual starter.

Ford Y-Block 239, 272, 292, 312 1954-1964. 1.2kw 9t 29mm. Some early 1954 engines may require a 10t 40mm pinion. Replaces 3 hole mount starters.

Ford:  Manual Trans. Check for 104.3mm register in sandwich plate and approx. 8mm pinion pre-mesh distance. If register is 103.6mm and pinion pre-mesh is approx. 16mm use RS806. 1.2kw 9t...

Ford:  Manual Trans. Check for 104.3mm register in sandwich plate and approx. 8mm pinion pre-mesh distance. If register is 103.6mm and pinion pre-mesh is approx. 16mm use RS806. 9t 25mm....