Products

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.2kw offset 11t replaces 9t pinion. Also available in 1.4kw, 2.0kw and...

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.4kw offset 11t replaces 9t pinion.   Replaces 3 hole mount starters.

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 1.2kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 1.4kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford, Mercury and Lincoln: FE(332ci, 352ci, 360ci, 368ci, 390ci, 406ci and 427ci)  and MEL(383ci, 410ci, 430ci and 462ci) V8 engines 1956-64. 2.0kw 9T 29mm replaces inertia starter. Replaces 3 hole...

Ford: Bronco II  2.8L V6 1.2kw offset 11t replaces 9t pinion.

Ford FE: Some 1962-64 and later FE's with 9t 25mm pinion 1.2kw. Also available in 1.4kw, 2.0kw and 2.2kw. Replaces 3 hole mount starters.

Ford: V8 Windsor (157t,160t and 164t flex plates), Cleveland (164t flex plate), B/Block,  Auto. Trans. C4, C6, FMX. 1.4kw offset 11t replaces 9t pinion. Replaces 3 hole mount starters. 

Ford: FE 390ci, 427ci and 428ci HP engines with cast iron headers or lge. dia. tubing headers. 1.4kw also available as 2.0kw.

Ford: FE 390ci, 427ci and 428ci HP engines with cast iron headers or lge. dia. tubing headers. 2.0kw.

Ford marine: V8 counter rotating engine,12V, 1.2kw, CCW. Also available in 1.4kw. Picture differs from actual starter.

Ford Y-Block 239, 272, 292, 312 1954-1964. 1.2kw 9t 29mm. Some early 1954 engines may require a 10t 40mm pinion. Replaces 3 hole mount starters.

Ford:  Manual Trans. Check for 104.3mm register in sandwich plate and approx. 8mm pinion pre-mesh distance. If register is 103.6mm and pinion pre-mesh is approx. 16mm use RS806. 1.2kw 9t...

Ford:  Manual Trans. Check for 104.3mm register in sandwich plate and approx. 8mm pinion pre-mesh distance. If register is 103.6mm and pinion pre-mesh is approx. 16mm use RS806. 9t 25mm....

Ford: Manual Trans. Allows the use of 157t flywheel in 164t bell housing. 11t Pinion offset.1.2kw. Also available in 1.4kw.

Ford: Manual Trans. Allows the use of 157t flywheel in 164t bell housing. 11t Pinion offset.1.4kw. 

Buick:77-79 350R Engine,70-79 403 Engine,70-76 455 Engine,75-77 260 V8 and 301 Engines. Cadillac:75-80 5.7L 84 Deville 4.1L  Oldsmobile:260,307,330,350,400,403,425,455 Engines. Pontiac:260,301,305P,326,389,400,403,421,455 Engines. Chevrolet: 1986-90 307ci drivers side mount only. Delco part...

Buick:77-79 350R Engine,70-79 403 Engine,70-76 455 Engine,75-77 260 V8 and 301 Engines. Cadillac:75-80 5.7L 84 Deville 4.1L  Oldsmobile:260,307,330,350,400,403,425,455 Engines. Pontiac:260,301,305P,326,389,400,403,421,455 Engines. 1.4kw  Picture differs from actual starter, upgraded version has...

Buick:77-79 350R Engine,70-79 403 Engine,70-76 455 Engine,75-77 260 V8 and 301 Engines. Cadillac:75-80 5.7L 84 Deville 4.1L  Oldsmobile:260, 307, 330,350,400,403,425,455 Engines. Pontiac:260,301,305P,326,389,400,403,421,455 Engines. 2.0kw  Picture differs from actual starter, upgraded...

Chrysler: All USA V8 post 1962 with 10t 32mm pinion 122T and 130T Ring gears. 1.2kw. Suits A engine with lge. dia. headers. Also available in 1.4kw.